top of page

Bronze Hardware

Packing Boxes

1-1/2" to 2-1/2"
Shaft Size

Rectangular Gland
Packing Box

Complete assembly with a gland and two (2) nuts per stud

3/4" to 3"
Shaft Size

Self-Aligning Gland Packing Box

Complete assembly with hose, four (4) clamps, a gland and two (2) nuts per stud

1-1/4" to 1-1/2"
Shaft Size

Rudder Port
Inside Mount

Available in square or oval flange

1-3/8” to 3”
Shaft Size

Stern Bearing Housings

Complete assembly with two (2) setscrews

1-3/8” to 2”
Shaft size

Rudder port
low profile

Available in square or oval flange

1-1/4" to 2-1/2" Shaft Size

Tournament
Rudder Port

Rectangular flange
Complete with packing nut and lock nut

1-1/4" to 2-1/2"
Shaft Size

Self-Aligning
Spud Packing Box

Complete assembly with hose, four (4) clamps, packing nut and lock nut

1-3/8" to 2-1/2"
Shaft Size

Water Cooled
Packing Boxes

Complete assembly with hose, four (4) clamps, hose adapter, packing nut and lock nut

Hull Strainers

Rectangular w/ S.S. Screen

Rectangular w/ S.S. Screen

4-1/2” x 9-13/16” and
6-1/8” x 14”

Round Strainer

Round Strainer

4" to 8" OD

Scoop Style Strainer

Scoop Style Strainer

3-1/8”x 4-5/8” to
7-5/16” x 10-9/16”

Scoop Style Strainer
Thru-Hull Design

Scoop Style Strainer
Thru-Hull Design

¾” NPS to 1” NPS

Thru-Hulls

Extra Long

Extra Long

From ¾” NPT to 2” NPT

With Hose Barb

With Hose Barb

From 5/8” Hose ID to 4” Hose ID

Standard

Standard

From 3/8“NPT to 2” NPT

Intake Strainers

Grocco ARG

1/2" to 3" NPT

Grocco ARG

For installation on the suction side of engines and pumps, GROCO ARG Series raw water strainers are the ideal filtration solution for cooling water intakes for any marine engine, ac unit, or genset. The superior design makes them long lasting and easy to service while the variety of sizes means there is a fit for every application. ARG series strainers are designed with a durable one-piece molded sight glass to eliminate tie rods and gaskets, and construction is with bronze head castings plus the choice of flter basket materials - #304 Stainless Steel, Monel, or Non Metallic. ARG strainers are offered in 1/2", 3/4", 1", 1-1/4", 1-1/2", 2", 2-1/2", and 3" NPT pipe sizes. Options include BSPP threaded ports, ABS and USCG compliant bronze enclosures, and #316 Stainless Steel Castings.
Buck Algonquin  ISB

1/2" to 3" NPT

Buck Algonquin ISB

Complete with stainless steel and polycarbonate cylinder for easy viewing

Valves

Low Profile Ball Valve

1/2” to 4” NPT

Low Profile Ball Valve

Drain plug and grounding screw Full flow Low profile Rated to 600 PSI Hard chromed ball Stainless steel vinyl coated handle Can be used for water, oil and gas
Gate Valve

3/8” to 3” NPT

Gate Valve

For use with non-shock cold water, oil or gas Adjustable packing nut Non-rising stem
Seacock Ball Valve

¾” to 4” NPT

Seacock Ball Valve

Drain plug and grounding screw Full flow Low profile rated to 600 PSI Hard chromed ball Stainless steel vinyl coated handle Aluminum handles for larger sizes Can be used for water, oil and gas
Full Flow Ball Valve

¼” to 4” NPT

Full Flow Ball Valve

Full flow Rated to 600 PSI Can be used for water, oil and gas Hard chromed ball Stainless steel vinyl coated handle Aluminum handles for larger sizes
Swing Check Valve

1/2” to 2”NPT

Swing Check Valve

Swing check valves are designed to prevent back flow in plumbing and liquid piping systems, while offering full flow performance with minimum turbulence or pressure loss. A positive seating disc allows flow only in one direction and a screw-in cap provides easy access for periodic cleaning. Horizontal or vertical use Rated to 200 PSI Can be used for water, oil and gas Temperature range -20ºF to 150ºF
*Products Displayed for Informational Purposes*
**If Not Currently In Stock Products Displayed Can Be Ordered Subject To Vendors Supply **
bottom of page